|
Post by Loggy on Jan 26, 2020 20:26:29 GMT -5
Started using Renaissance Wax number of years ago on my purdy gun's wood stocks. Midway etc etc carries it. Hard to beat!! Used Birchwood Casey Gun Wax previously & it doesn't compare by a long shot. Just thought I'd pass this on to those always looking for the best way to preserve your precious toys!! Renaissance Wax
|
|
|
Post by Dutch on Jan 26, 2020 20:58:43 GMT -5
Thanks, I'll try this on my plastic stocks.
Oh boy, I just had to.....
|
|
|
Post by Loggy on Jan 26, 2020 21:05:11 GMT -5
Thanks, I'll try this on my plastic stocks. Oh boy, I just had to..... A lil cheaper(below)!!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 26, 2020 22:10:30 GMT -5
Johnson paste
|
|
|
Post by davet on Jan 26, 2020 22:12:59 GMT -5
I have and use Renaissance wax. Primarily for my blued revolvers. It's a good product and keeps the moisture and rust out.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 27, 2020 6:11:59 GMT -5
Started using Renaissance Wax number of years ago on my purdy gun's wood stocks. Midway etc etc carries it. Hard to beat!! Used Birchwood Casey Gun Wax previously & it doesn't compare by a long shot. Just thought I'd pass this on to those always looking for the best way to preserve your precious toys!! Renaissance WaxI use Birchwood Casey gunstock wax on all my wooden stocked rifles that might be taken out in wet weather, including my not so pretty and well-used flinter. When applying it, I always remove the stock from the rifle so as to wax the hidden areas too. Not sure why other waxes like Renaissance cost over twice as much, but some car waxes are cheap and some expensive too. Whatever floats yer boat.
|
|
|
Post by Loggy on Jan 27, 2020 7:42:56 GMT -5
Never tried Johnsons. I know Mutt...I paid 15 bucks for Renaissance which is sorta salty(i guess). It's likely in the formulation costs. Did a lot of reading on it & concluded it was the best to float my wooden boats!
|
|
|
Post by CoureurDeBois on Jan 27, 2020 9:38:26 GMT -5
I've never been able to warm up to a non wood stock. I use Johnsons paste furniture polish on all of the guns I own, except for the the old Winchester and Marlin. Those two both get linseed oil. The first ting I do when I buy a new or used gun is remove all wooden parts. I then give the inters a good coat or two or three of Tru-oil, rubbing it in till it's mostly dry with my fingers. Then all of the wood gets a coat or two of the Johnsons polish. Never had a problem with warping, and I've hunted in some real miserable weather in my younger days.
|
|
|
Post by timberdoodle on Jan 27, 2020 10:07:02 GMT -5
|
|
|
Post by westfieldjoe on Jan 27, 2020 10:12:19 GMT -5
If getting older finds you tripping and falling into the gutter more often, you're still protected.
|
|
|
Post by timberdoodle on Jan 27, 2020 10:31:34 GMT -5
If getting older finds you tripping and falling into the gutter more often, you're still protected. how well I know!
|
|
|
Post by Loggy on Jan 27, 2020 11:18:47 GMT -5
Been using this stuff since the 70's..still working off the same can
Throw any 300 games yet?
|
|
|
Post by timberdoodle on Jan 27, 2020 14:13:44 GMT -5
|
|
|
Post by Loggy on Jan 27, 2020 14:41:07 GMT -5
STRIKE!!!
|
|
|
Post by acorn20 on Jan 27, 2020 15:07:43 GMT -5
Been using Renaissance Wax for years. After cleaning, I coat the wood and exterior metal on all my firearms with it. I bought a supply of SS2 and the inside of all barrels and actions get treated with this.
|
|
|
Post by Loggy on Jan 27, 2020 15:17:19 GMT -5
Been using Renaissance Wax for years. After cleaning, I coat the wood and exterior metal on all my firearms with it. I bought a supply of SS2 and the inside of all barrels and actions get treated with this. Hey Dan.....what is SS2? I believe you may have given me a can a number of years ago??
|
|
|
Post by acorn20 on Jan 27, 2020 15:30:44 GMT -5
SS2 is an all purpose gun lubricant. It was manufactured by TDP Industries, Inc. out of Doylestown, PA. I don't know if they're still in business. IIRC, Tip Curtis told me the owner either died or closed the business and his widow called him to see if he would be interested in buying the inventory. He did and I bought several cans up at Dixon's probably 8 or 9 years ago. Tip stopped going up to Dixon's but I'd see him at Fort Frederick however, due to the regulations, he couldn't sell it at the encampment.
Come to think of it, you should have a can around somewhere because I gave both you and Tom a can years ago at one of our last flounder float trips.
|
|
|
Post by Loggy on Jan 27, 2020 15:43:15 GMT -5
Yeah I remembered that after I posted. It's down at my Chincoteague place on my work bench. I have used it on my reels etc as a rust preventative. Good stuff but couldn't find it since.
|
|
|
Post by turkeykiller on Jan 27, 2020 16:42:22 GMT -5
I use WD40
|
|
|
Post by acorn20 on Jan 27, 2020 17:06:08 GMT -5
The WD in WD-40 stands for Water Displacement. SS2 is probably very close to the same formula.
|
|
|
Post by Loggy on Jan 28, 2020 7:09:49 GMT -5
|
|
|
Post by turkeykiller on Jan 28, 2020 7:31:13 GMT -5
Yep, been doin it for years
|
|
|
Post by rem700 on Jan 28, 2020 7:58:07 GMT -5
I use pledge furniture polish on wooden stocks
|
|
|
Post by Loggy on Jan 28, 2020 19:01:38 GMT -5
Yep, been doin it for years Never thought about it to be used as a fine wood protective finish such as wax. I have sprayed WD-40 on my Lund boat's wooden seat benches to remove dried/weathered marine varnish plus gummy sea salt residue which the WD-40 effectively softens(after standing a few minutes) liquidfying weathered varnish finish making removal/clean-up easier. Don't think it will ever be used to preserve the finish on my custom PA Mountain Rifles curly maple stock but great you found success with WD-40 use as your favored wood protectant!!!
|
|
|
Post by fleroo on Jan 29, 2020 13:00:09 GMT -5
Same can ? Must not butcher much meat.
|
|